![\"Terminology_of_Scissors_2\"](\"https:\/\/www.boldbarber.com\/wp-content\/uploads\/2015\/12\/Terminology_of_Scissors_2.jpg\")
<\/a><\/p>\n- \n
- The points or tips<\/strong> are the ends of blades.<\/li>\n
- The finger bows<\/strong> are the handles, where the fingers are inserted. Generally, there are two finger bows, one for the thumb and one for the fingers.<\/li>\n
- The size<\/strong> is the total length of the scissors, measured from the points to the end of the finger bows. The units of scissor measurements can differ depending on the country where the scissors are manufactured and their target audience. The shortest scissors are usually 4.5 inches (11.4 cm) long while the longest are usually 7 inches (17.8 cm). The most common and popular hair shears range between 5 and 6 inches (12.7-15.2 cm) because they are suitable for most people.<\/li>\n
- The outside blade<\/strong> is the dull edge of the blade. This is sometimes called the backside of the blade as well.<\/li>\n
- The thumb blade<\/strong> is the blade which is connected to the finger bow for the thumb.<\/li>\n
- The finger blade<\/strong> is the blade which is connected to the finger bow for the fingers.<\/li>\n
- The adjustment screw<\/strong> is the screw which connects both blades and handles in the middle. There are adjustable and non-adjustable screws. Adjustable screws allow you to adjust the tension of cutting. Non-adjustable screws simply connect the blades and handles, allowing them to move.<\/li>\n
- The screw hole<\/strong> is where the screw is attached to the blades.<\/li>\n
- The wing<\/strong> is the part between the adjustment screw and the shank.<\/li>\n
- The bumper or stopper<\/strong> is the cushioning element between the finger bows.<\/li>\n
- The finger rest<\/strong> is a piece of metal intended for use as finger support. This relieves the stress on the wrist and shoulder. Finger rests can be removable or non-removable.<\/li>\n
- The finger insert<\/strong> is a rubber insert for the finger hole. It improves comfort and adjusts the size of the finger hole.<\/li>\n
- The edge<\/strong> is the sharp part of the blade. There are different kinds of blades such as serrated edge, straight edge, and convex edge. Serrated edge blades are best for beginners because their edges slip less, thus giving more control when cutting dry hair. Straight edge blades are best for hair cutting techniques such as slice cutting and point cutting. Convex edge blades are extremely sharp. This makes them suitable for thinning and smooth cutting. Professional hairdressers who demand maximum control, balance, and comfort choose convex blades. It should be mentioned that hair thinning shears have one or two blending teeth blades.<\/li>\n<\/ul>\n
![\"Shears_edges\"](\"https:\/\/www.boldbarber.com\/wp-content\/uploads\/2015\/12\/Shears_edges.jpg\")
<\/a><\/p>\n- \n
- The bow<\/strong> is the outside part of the handle. There are three types of handles: straight, semi-offset, and full-offset. These have to do with the position of the handle in relation to the blades. It is very important to choose the right handle, based on your individual hair cutting techniques and specifications. Using the incorrect handle can cause carpal tunnel syndrome. Repetitive wrist motions during hair cutting cause the median nerve to rub against the carpal tunnel. Repeating this movement thousands of times daily can damage the nerve. This can result in tingling, numbness, or pain in the thumb, index finger, middle finger, or ring finger. To relieve the stress and minimize the risk of repetitive strain injuries or carpal tunnel syndrome, hair cutting shears with crane handles or offset handles are recommended for use by most stylists.<\/li>\n<\/ul>\n
- The finger bows<\/strong> are the handles, where the fingers are inserted. Generally, there are two finger bows, one for the thumb and one for the fingers.<\/li>\n